Table of contents:
2. What does the ergonomics of lighting mean?
3. Different sources of lighting in the workplace
4. Artificial lighting and its types in the workplace
4.3 Localised-general lighting
6. Ergonomic lighting standards
7. Lighting ergonomics: best practices for a safe and productive workplace
Have you ever observed how the lights in your office could be causing health problems for your employees? Believe it or not, a lack of office lighting ergonomics can result in a broad scope of health problems.
According to studies, particular light types can decrease or increase cortisol production. When cortisol levels get low, it can result in fatigue, weakness, and weight loss. On the other hand, high cortisol levels increase the possibility of chronic conditions, such as diabetes and cardiovascular disease. It’s surprising how big of an impact it has on our physical well-being.
This is why considering the correct lights in your employees’ workplace is crucial to ensure their wellness. With proper ergonomic lights, you can witness enhanced employee performance and reduced stress levels. Consequently, you will see positive outcomes from your company’s operations.
To create a comfortable and productive environment, prioritise the ergonomics of lights. You can also read more about ergonomics assessment in general on one of our blogs.
Meanwhile, this blog will define the ergonomics of lighting, explain various light types, discuss factors that cause poor luminance, highlight the standards you should implement in your employees’ offices (industrial or corporate), and more.
Get ready to take down notes because if you see your workers feeling blue, it might not just be their mood—it could be their office lights!
Ergonomics also plays a crucial role in the lights of a workplace. It doesn’t only involve desks, positions, and working accessories. So what does lighting ergonomics mean?
Ergonomics of lighting refers to the deliberate design and placement of light fixtures that prioritise the safety and comfort of workers. It answers the question: What light source are your employees using? Where do you need to position the sources? How intense should the light they use be? What colour of lights should they use?
Those guide questions will help you do a brief light ergonomics assessment for your employees’ workplace. It also depends on their job. For example, industrial workers may need more intense brightness, while office workers typically need proper lighting for computer work, which is soft and uniform.
In order to distinguish the lights your employees need, learn about the different sources of lights.
Is there an office that gets the light only from the sun? We never know! But, of course, we all know we get most of our lighting from light sources that use electricity.
Here are the two sources of lighting:
The amount of daylight that gets inside the building relies on the building’s architecture, the intensity of the sunlight itself, the direction of the sunlight, the season, and the local terrain.
It’s also vital to keep the windows clean. If there is too much amount of sunlight, tinted glass, curtains, awnings, or blinds can help.
Ergonomic lighting in the workplace means also making use of the sunlight, but not so much that it blinds your employees or makes them feel like they are working in the sun!
A study found out that an office job that involves high interaction levels (e.g., sales representatives, customer service associates, or administrative assistants) can be more stressful at times, and exposure to natural light can be more beneficial for them.
If you have industrial employees, the ergonomic lighting in their workplace, such as manufacturing plants or warehouses, may also need natural light exposure.
Different types of electric lights can affect how much light there is, the colour of the light, and how objects appear. It’s important to select the proper light for your workplace and task because the colour and intensity of the light can affect the mood, alertness, and even sleep patterns of your employees.
The usual electric type used in offices is fluorescent, mercury, and LED (light-emitting diodes), while industrial workplaces use metal halide, high-pressure sodium, and mercury.
The next section will elaborate on the types of artificial types in the workplace. It will help you picture which types your employees use in their offices.
When it comes to the lights in a workspace, the general type is crucial. It’s the kind that provides overall illumination to a room, helping you easily see and get stuff done.
One of the most typical kinds of general light is ceiling fixtures. You probably have them in your building. They’re the lights mounted on the ceiling and spread light evenly throughout the room. They’re perfect for illuminating extensive areas like conference rooms, open-plan offices, and lobbies.
When it comes to illuminating a workstation, local (or task) lighting is a great way to increase light levels over the work and close surroundings.
This type is perfect for jobs that need much focus and attention to detail, such as reading, writing, or crafting. It allows the user to adjust and control the lighting levels, which can help reduce eye strain and fatigue.
Plus, it provides flexibility for each user, allowing them to customise the lights to their specific needs. An example of a local light is a desk lamp, which provides extra illumination for reading, writing, and other close work. Incorporate this in the ergonomics of computer users’ lighting, especially if their tasks involve such activities.
This combines the best of both worlds – general and task lighting. Hence, it is perfect for workspaces that need both broad and focused lighting.
Of course, while you learned the types of light sources that may be useful in particular spots in your building’s offices or other areas, you also need to know what terrible lights are.
Poor lighting is not just when there is insufficient light in the workplace. It also includes situations where there is excessive light or when the light is not directed correctly.
These are the causes of poor lighting:
When the levels are too low, it will be difficult for your employees to see and perform tasks, leading to decreased productivity and increased accident and injury rates.
As per the Health and Safety Executive (HSE), employers reported approximately 71,062 non-fatal employee injuries between 2017 and 2018. Most of these injuries resulted from common incidents that could have been avoided. The report identified that the two leading causes of workplace injuries were slipping, tripping, and falling, followed by handling, lifting, and carrying. While employers are required to enforce various procedures to prevent accidents, poor luminance is often overlooked as a workplace hazard.
Below are the suggested illumination levels for various types of work environments:
Glare is a phenomenon that occurs when there is excessive brightness or contrast in a visual field, causing discomfort and visual impairment.
Research has shown that glare can have negative effects on both physical and mental health. For instance, discomfort glare can cause eyestrain, headaches, and fatigue, while disability glare can reduce visual acuity and increase the risk of accidents and injuries.
Glare has also been a typical but overlooked problem in office environments. In fact, up to 50% of office workers report experiencing glare. It happens when there is high contrast between bright and dim areas of the computer screen, horizontal work surface, and surrounding areas that can cause eye fatigue and headaches.
Flicker is not just what you see in horror movies; your employees may also be seeing it in their office light sources and devices (i.e., computer monitors, laptops, lamps, or mobile devices used for their work).
It occurs when the brightness of a light source fluctuates rapidly, causing visual discomfort and impairing visual performance. Flicker can be brought about by different factors:
Fluorescent lights that flicker 120 times per second (120 Hz) are usually not noticeable to most people. However, the flicker in LED lights may be more noticeable because they flicker between less than 10% and 100%, while fluorescent lights dim to about 35% and then go back to 100%.
Here are the effects of poor lighting on employees, which answers the question, “How does lighting affect ergonomics?”:
For a comprehensive guide on workstation ergonomics, check the essential tips on our blog.
Ergonomic lighting standards refer to the guidelines and principles that are used to design light systems in the workplace to ensure that they are safe, comfortable, and efficient for employees.
Below are the checklists you need to consider when it comes to lighting ergonomics. You can use these checklists to conduct a brief assessment of lighting ergonomics among your employees.
General lighting checklist:
Office lighting checklist:
Industry lighting checklist:
If you received “no” answers from your employees, or if they did not put check marks on some items on the lists, conduct corrective actions to ensure proper lighting in the workplace. Remember that this is not an all-out list and a complete lighting survey may be necessary.
You can also advise them to follow the 20-20-20 rule. When they are facing computer screens, every 20 minutes of screen time, they should stop and look at something that’s 20 feet away for at least 20 seconds. This allows their eyes to rest, preventing eye strain.
Poor lighting ergonomics is not only caused by the general lights in your office; it may also be caused by the differences among your employees. You can consult us through our Ergonomic Risk Management service.
Workplace lighting ergonomics is the science of designing lighting systems that are safe, comfortable, and efficient for employees in the workplace. Proper lighting ergonomics can help prevent visual strain, headaches, and fatigue and can improve productivity, reduce errors, and minimise the risk of accidents and injuries.
The key considerations for lighting ergonomics include the following:
By adhering to these critical points, you can create a safe, comfortable, and efficient working environment that promotes employee well-being and productivity.
Now, why is lighting important in ergonomics?
As discussed, employees who work in spaces with access to natural light report better sleep quality, higher levels of physical activity, and fewer instances of absenteeism. Hence, by prioritising employee wellness, your company can benefit from the following:
Yes, that’s what ergonomic lighting can do!
But how should you start? Start with our ergonomic assessment service. It is a comprehensive evaluation of your employees’ office’s ergonomics, including chairs, desks, lighting, and so on. Try it now and see how it greatly transforms your workforce.
Table of contents: 1. Introduction 2. Ways to encourage your employees to eat healthy at…
Table of contents: 1. Introduction 2. Tips for movement practices at the office 2.1 Set…
Table of contents: 1. Introduction` 2. What is a sit-stand desk? 3. Pros and cons…
Table of contents: 1. Introduction 2. What is a DSE assessment? 2.1 Improved employee comfort…
Table of contents: 1. Introduction 2. Benefits of ergonomics in your employees' workplace 2.1 Enhanced…
Table of contents: 1. Introduction 2. Understanding employees’ need to rest and relax 2.1 Effects…